Tracked delivery anywhere in New Zealand. It is free on orders of $60 or more, and a flat $22 below that. Allow 5 to 7 days, after a 24 to 48 hour handling time.
For an eligible change-of-mind return, contact us within 15 days of receipt. The item must be unused, in original resaleable condition, with proof of purchase. A $59 restocking fee applies and you pay return postage. See our returns policy for exclusions and instructions.
Your rights under New Zealand's Consumer Guarantees Act are separate. For faulty, damaged or incorrect goods, no change-of-mind restocking fee applies. We arrange the appropriate repair, replacement or refund and cover applicable return postage.
No marks on your edgingThe rubber face drives steel sections and plastic spikes in without denting the coating or splitting the spike.
16oz head, no bounceEnough weight to drive a 100mm spike, and a dead-blow feel so the mallet stays on target.
Wooden handle that soaks up shockEasy on the wrist over a long run of edging. 55mm face, 90mm head.
Useful well past the gardenPavers, tiles, laminate flooring, tent pegs. Anything you want tapped, not smashed.
About this product
The right tool for tapping edging in.
A 16oz rubber mallet with a wooden handle. Drives spikes and sections home without marking them.
A steel hammer dents black-coated edging and splits plastic spikes. A rubber mallet drives both home with a firm, dead tap and leaves no mark.
This is a 16oz head with a 55mm face and a 90mm length on a shock-absorbing wooden handle. It does not bounce, so each strike goes where you aim it. Handy for pavers, tiles and anything else you do not want to dent.
A steel hammer dents black-coated edging and splits plastic spikes. A rubber mallet drives both home with a firm, dead tap and leaves no mark. If you are fitting any edging on this site, this is the tool.
The 16oz head has a 55mm face and a 90mm length, enough weight to drive a 100mm steel spike. It resists bounce, so each strike lands where you aim it.
The wooden handle soaks up the shock over a long run of edging. Afterwards it is just as handy for pavers, tiles, tent pegs and anything else you want tapped rather than smashed.
Still deciding?
Not sure yet? That is fine.
For an eligible change-of-mind return, contact us within 15 days of receipt. The item must be unused, in original resaleable condition, with proof of purchase. A $59 restocking fee applies and you pay return postage. See our returns policy for exclusions and instructions.
Your rights under New Zealand's Consumer Guarantees Act are separate. For faulty, damaged or incorrect goods, no change-of-mind restocking fee applies. We arrange the appropriate repair, replacement or refund and cover applicable return postage.
Driving edging spikes and interlocking sections into the ground without marking them. A steel hammer chips coatings and splits plastic spikes. This does not.
Is it heavy enough for steel edging?
Yes. The 16oz head drives 100mm steel spikes into prepared soil. Tap, do not whack, and let the weight do the work.
What do I get?
One mallet. Rubber head, wooden handle.
How do I use it?
Hold it near the end of the handle, line up the face over the spike or the top edge of the section, and strike squarely. The rubber face spreads the blow so nothing dents.
Will it mark black or stainless edging?
No. That is the point of the rubber face. It drives the section down without scuffing the coating.
Does it bounce?
Very little. The head is designed to resist bounce so each strike lands where you aim it.
What is it made of?
A rubber head with a 55mm face and 90mm length, on a wooden handle that absorbs shock.
How much does it cost?
$15. Delivery is free once your order is $60 or more. Under $60 it is a flat $22.
Are there other sizes or options?
One mallet is listed. It suits every edging job on this site.
What do the photos show?
The mallet and its size. Edging and garden props are not included.
Which specs should I check before I buy?
Head weight (16oz), face diameter (55mm), head length (90mm) and the wooden handle. If anything is unclear, ask us first.
How many do I need?
One. It will do every edging job on this site and plenty more.
Can I order more than one?
Yes. Set the quantity on this page or change it in your basket.
Will it work for pavers and tiles?
Yes. It is the usual tool for bedding pavers, tapping tiles and laying laminate, because it does not mark the surface.
Any safety tips?
Keep your other hand clear of the strike, wear eye protection if you are driving steel, and check the head is tight on the handle before each job.
What if a spike will not go in?
Stop. It has hit a stone. Move the spike a few centimetres rather than hitting harder, or the spike will split.
Can I use it with plastic edging spikes?
Yes. It is the right tool for them. A steel hammer splits the spike heads.
How do I look after it?
Wipe it down and store it dry. Keep the wooden handle out of the rain so it does not swell or crack.
Does the rubber wear?
It will scuff with use, which is normal. The head lasts a long time on garden jobs.
Can I check it will suit my job before I buy?
Yes. Tell us what you are driving in and we will tell you straight.
Is the price in New Zealand dollars?
Yes. Every price and checkout total is in NZD.
What does delivery cost?
Free when your goods total after any discount is $60 or more. Under that, delivery is a flat $22.
How long does delivery take?
Allow 24-48 hours for handling, then an estimated 5-7 days in transit. These are estimates, not a promised arrival date.
Can I use the valued-customer code?
Yes. It takes 15% off the goods. Delivery is not discounted, and free delivery is worked out on the discounted goods total.
How do I track my order?
Use the Order Tracking page with the details we send after dispatch. If anything looks stuck, email us with your order reference.
Can I return it if I change my mind?
Yes, within 15 days of receipt, as long as it is unused and in original resaleable condition with proof of purchase. A $59 restocking fee and return postage apply to eligible change-of-mind returns. Your statutory rights are separate.
What if it arrives damaged or wrong?
Email us with your order reference and a couple of photos. The change-of-mind fee does not apply to faulty, damaged or incorrect goods, and your Consumer Guarantees Act rights are unaffected.
Can I cancel before it ships?
Contact us as soon as you can. The voluntary cancellation policy allows requests within 12 hours before shipment and provides for a 12.5% processing fee. Statutory remedies are unaffected.
I have a big project. Can you help?
Yes. Use the wholesale enquiry page and tell us the products, quantities and your delivery postcode.
Where do I get help?
Email theteam@customersupport.care or use the Contact page. Include the product name and your question, plus your order reference if you have one.
The complete guide
Rubber mallet: the complete guide
2 min readLawnEdge New Zealand
Every edging product we sell goes into the ground with a tap. Steel sections on spikes, plastic spikes through flexible edging, stone-effect pieces pushed into soil. A steel hammer does all of that badly. It chips coatings, splits spike heads and bounces. A rubber mallet does it properly.
Specifications
16oz rubber head
55mm face diameter, 90mm head length
Shock-resistant wooden handle, shaped for grip
Non-marring face, resists bounce
How to use it
Hold it near the end of the handle. Line the face up squarely over the spike head or the top edge of the section. Strike firmly and let the weight do the work. A square, moderate tap drives further than a wild swing, and it does not split the spike.
If a spike stops going in, it has hit a stone. Move it a few centimetres rather than hitting harder.
What it is for
Driving the spikes on black steel, corten and stainless edging without marking them. Tapping plastic spikes through flexible edging without splitting the heads. Seating barrier fence panels. Bedding pavers, tapping tiles, laying laminate, tent pegs.
Looking after it
Wipe it down and store it dry. Keep the wooden handle out of the rain so it does not swell or crack, and check the head is tight on the handle before each job. The rubber face will scuff with use. That is normal.
Not sure which material suits your ground, or how many metres a curved bed needs? Ask before you order. Free delivery across New Zealand on orders over $60.
Rubber mallet, sold by LawnEdge New Zealand at lawnedge.co.nz. A 16oz rubber-headed mallet with a wooden handle, 55mm face diameter and 90mm head length, for driving edging spikes and sections in without marking them. $15. Head: Rubber; Nominal weight: 16oz; Handle: Wood; Face diameter: 55mm; Head length: 90mm. NZ delivery: $22, free from $60 after discount. Handling 24-48 hours, delivery estimated 5-7 days.
